So I’m sitting down with a client friend today. He has a concept EP that he’s been working on for the past couple of months, but now it’s ready to go. As we sit and chat before the session I figure out he’s looking to do a vinyl as well as digital release. Things just got more interesting for me.
Unfortunately for the the ones footing the bill, it’s common knowledge (or at least it should be) that the CD master doesn’t always make the best cut. And he wants a nice hot CD master. Not only that, but my friend had done all his tracking and mixing at 24bit 96k. Sounds like a perfect time to suggest doing two different mastering passes. One will be the loud 16bit 44.1 CD/dig release, the other a full dynamic/depth interpretation at high resolution 24bit 96k. Sweeet. Turns out the label will pay for it: great.
After touching on all the finer points of mastering we get to work. I do the CD version first. After each transfer I work out a different vinyl-centric approach and print at high res. On this project I’m looking to get out of any squashed digital peak limiting, though I’m still using some analouge hard limiting for feel, really to get that kick drum right. I also tend to change the EQ once the material is brought back from the brink of converter/limiter annihilation. Sometimes the annihilation is doing a good thing, in this case it was making the high freq crunchy and present, so I brought up a bit more of the highs to reflect this in the vinyl transfer. Also the bass changes when you pull it back too, the dynamics of it, in this case too much, so pulling out a little more in the low end helped keep things feel balanced. Onwards we go EQing the EP down in parallel.
Had this been an LP, I would have approached the CD and vinyl mastering in two separate sessions. The process would become exhausting over the course of a full length album. But in the case of a shorter program like this one, it’s great to give the client immediate feedback on what the vinyl would sound like.
Now I’m checking out the potential side lengths and formulating my best release format. Hmmmm, a 12 and 14 min side. Could be a 10″ at 33 1/3 or, yes, my favorite 12″ 45 rpm. Maximum disk diameter means less inner band distortion. High speed 45 rpm keeps the groove geometry nice and open, extended high freq response. Great, awesome. The 14 min side is a bit consistently loud, so we may have to cut the level back a dB or two – but it’s well worth it for the 12″ 45.
We’re done for the day. My client takes a reference home to check it out – and loves it. If he wanted to change anything, I would have had to change both EQs — so it’s especially good that we nailed it on the first pass.
Continued in Part 2.