Scott Hull on Vinyl, Part One

Header image for Scott Hull on Vinyl seriesMy name is Scott Hull — I’m the owner of Masterdisk studios in NYC. I’ve been mastering records and cutting lacquers since the early 80s.

In advance of Record Store Day 2013 I will bring you a series of articles just about vinyl. A new one every week until RSD on Saturday, April 20, 2013. I hope you find them to be a fun and informative look at many different aspects of making and enjoying records. We are going to talk about vinyl from all angles: technical, musical and historical. This behind-the scenes-blog will help you understand what goes into making exceptionally good sounding records.

Vinyl Basics

Let’s talk about some basic equipment. The most important piece of audio equipment in my disk cutting room is my ears. Because every single decision I make is based on what I’m hearing, and how that relates to thousands of other records I’ve heard and mastered. Gearheads might be a little disappointed with that statement, but musicians can probably relate.

Turning a recording into a record is very straightforward process. Back in the 40s, there were portable recording rigs that had a microphone and a platter that cut “field recordings” into plastic discs. The machine was marvelously simple. The microphone signal was electrically amplified and caused a cutter head coil to vibrate while it carved through the plastic. The disc was about the size of a 7″ single and played at 78 rpm.

I have one of these discs — it’s a recording of my grandmother and her six young sons outside a grocery store in Tippecanoe, Ohio. The interviewer was selling bread, and asked my grandmother what bread she liked best. Then each son said a Sunday School verse he had memorized. It must have seemed like magic to hear their voices played back on a record. I remember hearing this at a very young age, and marveled at the recording of my father as a 9 year old.

Postcard image of a SoundScriber
The SoundScriber (postcard from The Blog About the Postcards).

Many of these disks were recorded at home and sent overseas to servicemen in war zones. And many came the other way too — carrying the real live voice of their son or husband serving far away.

So, why bring up an obscure dictaphone technology from fifty years ago? I think it’s best to first think of making a record as a very simple process. A process that becomes more complicated as we try to make the recordings better, and longer, and quieter.

When you’re cutting a record, you start with a recording on analog tape, or as a digital file. This recording is converted to an analog voltage, amplified and sent to the cutting head on a lathe. The cutting head is very much like a speaker. When the signal comes into the voice coil, it causes the “speaker” section to vibrate. The Voice coil is attached to a cantilevered shaft and causes a small sapphire needle to wiggle. Each wiggle—left and right and up and down—is analogous to the audio signal being fed in. This sapphire stylus is allowed to contact the surface of a soft lacquer disk and the squiggles are preserved in the plastic. It’s magic.

The reproduction of the signal is just the reverse process—except that the cutter head is designed to dig a small trench in the vinyl, and the playback cartridge is much more delicate and meant to ride along in the groove without damaging it. As the playback stylus rides through the groove, the microscopic squiggles move a coil and the voltage is faithfully reproduced, amplified and routed to speakers for listening.

Next week I’ll take a step back from the technical view and discuss the experience of playing a vinyl record. Over the course of the next few months—leading up to Record Store Day 2013—I hope to touch on many different aspects of the art and science of vinyl. I hope you’ll enjoy the ride.

(Read all of the “Scott Hull on Vinyl” articles here.)

Fill out my online form.